Toro 34230 - Spreading Material; Using the Deflector Gate; Spreading Material Procedure

UsingtheDeectorGate
Usethedeector-gatecontroltotemporarilystopor
deectgranularmaterialawayfromsidewalks,parking
lots,patios,oranywherethegranularchemicalsare
notdesired.
Note:Thedeectorgatechangesthedischargedof
materialsfromtheleftsideofthespreaderonly.
•Pushtheknobforthedeector-gatecontroldown
tolowerthedeectorandtemporarilyblockthe
granularmaterial.
•Pulltheknobtoraisethedeectortocastmaterials
normallyattheleftsideofthemachine.
g027373
Figure38
1.Fence
3.Deectorgatelowered
2.Flowers
SpreadingMaterial
1.Starttheengine,andadjustthethrottlemidway
betweentheSLOWandtheFASTpositions
(Figure39).
g305555
Figure39
1.Deector-gatecontrol6.Choke
2.Heavydistribution
granular-gatelever
7.Throttle
3.Lightdistribution
granular-gatelever
8.Impellercontrolswitch
4.Flow-rateadjustment
knob—lightdistribution
granulargate
9.Spreaderandinformation
display
5.Ignitionswitch
10.Spreader-patterncontrol
2.Tapthetopoftheimpellercontrolswitchtorun
theimpellermotor(Figure39).
Note:Thespreadercontrollerrunstheimpeller
motoratthelastspeedsettingtowhichyou
adjustedit.
3.MovethethrottletotheFASTposition,anddrive
themachineforward.
4.Opentheeitherthenarroworwideimpeller-gate
levertobeginspreading(Figure40).
Note:Usetheow-rateadjustmentknob
tocontrolthedischargerateofthegranular
materialfromthehopperontotheimpellerwhen
34