Toro 34230 - Page 60

3.Alignadrainpanwithacapacityof1.5L(1.6
USqt)orgreaterbelowthedrainvalveatthe
bottomoftheskidplateandinboardfromthe
batterytray(Figure77).
g258081
g258082
Figure77
Bottomofthemachine
1.Frontofthemachine4.Skidplate
2.Hex-headstem5.Batterytray
3.Drainvalve
4.Openthedrainvalvebyrotatingthehex-head
stemofthevalvecounterclockwisewitha
wrench(Figure77).
Note:Allowtheengineoiltodraincompletely.
5.Closethedrainvalveclockwiseuntilthevalveis
fullyseated(Figure77).
Note:Wipecleananyresidualoilfromthedrain
valve.
AddingEngineOiltotheEngine
Important:Donotoperatetheenginewiththeoil
levelbelowtheLow(orAdd)markonthedipstick,
orovertheFullmark.
1.Removethedipstickfromthellerneckofthe
engineandwipecleanthedipstickwitharag
(Figure78).
g257928
Figure78
1.Dipstick2.Fillerneck
2.Slowlypour1.1L(1.2USqt)ofthespeciedoil
intothecrankcaseoftheenginethroughthe
llerneck(Figure78).
3.Insertthedipstickfromtheengineasshownin
Figure79.
Note:Donotthreadthedipstickintotheller
neckwhencheckingtheengineoillevel.
g257927
Figure79
1.Dipstick3.Minimumoillevel
2.Maximumoillevel
4.Removethedipstickfromthellerneckandlook
attheoillevelinthedipstick(Figure79).
Note:Theengineoillevelmustcoverthe
hatch-markedareaofthedipstick(Figure79).
5.Iftheoillevelislow,addthespeciedoilintothe
engineuntiltheoillevelisbetweenthehatch
markedareasonthedipstick.
Note:Donotoverlltheenginewithoil.
60