Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Step
Description
Qty.
Use
Steering Wheel
1
Lock Washer, 1/2 inch
1
Nut, 1/2 inch
1
1
Logo Cover
1
Install the steering wheel.
Seat
1
Spacer, large inside diameter
2
Spacer, small inside diameter
2
Shoulder bolt
2
Knob
2
2
Flat washer, 11/32 inch
2
Install the seat.
Bolt, 1/4 x 3/4 inch
2
3
Hex Nut, 1/4 inch
2
Activate and install the battery.
Front tires
2
Cotter pin
2
Shim washers
4
Washers, thick
2
Washers
2
4
Cap 2
Install the front tires.
Rear tires
2
5
Lug nuts
10
Install the rear tires.
6
No parts required
–
Check the Tire Pressure and Tractor
Lubrication.
Operator’s Manual
1
Engine Operator’s Manual
1
Parts Catalog
1
Safety Video
1
Registration Card
1
7
Oil drain hose
1
Read the Operator’s Manual and watch
the video before operating the machine.
8
No parts required
–
Check the safety system.
9
No parts required
–
Test drive the tractor.
Note: Deter mine the left and right sides of the mac hine from the nor mal operating position.
10
To Next Page
Loading...
