MOWER DECKS
6-10 Toro Z Master G3 3000/5000/6000 Series Service Manual
6
6. Remove the seal spacer from the top of the spindle
housing (Fig. 407).
8. Remove the top oil seal from the spindle housing
(Fig. 409).
Fig. 407 DSCN-2673a
7. Remove the seal spacer from the bottom of the
spindle housing (Fig. 408).
Fig. 408 DSCN-2674a
Fig. 409 DSCN-2675a
9. Remove the bearing from the top of the spindle
housing (Fig. 410).
Fig. 410 DSCN-2676a
To Next Page
Loading...
