Toro 74954 - Mower Spindle Disassembly (2010 & Later Model G3, 3000;5000;6000 Series Units)

MOWER DECKS
6-18 Toro Z Master G3 3000/5000/6000 Series Service Manual
6
1. Remove the 3 ange nuts retaining the pulley to the
spindle hub (Fig. 436).
Fig. 436 DSCN-0082a
2. Remove the top lock nut and washer from the
spindle shaft (Fig. 437).
Fig. 437 DSCN-0087a
Mower Spindle Disassembly (2010
& Later Model G3, 3000/5000/6000
Series Units)
Fig. 438 DSCN-0089a
4. Remove the spindle shaft (Fig. 439).
Fig. 439 DSCN-0090a
3. Remove the spindle hub assembly (Fig. 438).