Toro 74954 - Brake Caliper Installation

CHASSIS
3-49Toro Z Master G3 3000/5000/6000 Series Service Manual
3
Brake Caliper Installation
1. Install the brake mount plate to the caliper (Fig. 176).
Fig. 176 DSCN-4398a
2. Apply thread locker to the 2 bolts that retain the
brake mount plate (Fig. 177).
Fig. 177 DSCN-4400a
Fig. 178 DSCN-4402a
3. Install two washers between the brake mount plate
and the transmission and tighten the bolts (Fig. 178).
4. Install the L-bracket, spring, washer, and nut on the
threaded end of the brake cable (Fig. 179).
Fig. 179 DSCN-4314a