Toro 74954 - 3 Chassis; Caster Fork Assembly Replacement; Caster Fork Assembly Removal

CHASSIS
3-1Toro Z Master G3 3000/5000/6000 Series Service Manual
3
Caster Fork Assembly Replacement
Caster Fork Assembly Removal
1. Raise the front of the machine off the ground,
leaving enough clearance to remove the caster fork
from the frame.
2. Remove the grease cap from the frame (Fig. 001).
Fig. 001 PICT-0351
3. Remove the locknut (Fig. 002).
Fig. 002 PICT-0352a
4. Slide the caster fork assembly out of the frame (Fig.
003).
Fig. 003 PICT-0355