Toro 74954 - Mower Spindle Disassembly (2009 Model G3 Series Units)

MOWER DECKS
6-9Toro Z Master G3 3000/5000/6000 Series Service Manual
6
Mower Spindle Disassembly (2009
Model G3 Series Units)
4. Remove the bearing shield (Fig. 405).
Fig. 403 DSCN-2669a
3. Remove the pulley hub and square key (Fig. 404).
Fig. 404 DSCN-2670a
Fig. 405 DSCN-2671a
5. Remove the spindle housing from the spindle shaft
assembly (Fig. 406).
Fig. 406 DSCN-2672a
1. Place the blade saddle in a vise.
2. Remove the nut and washer (Fig. 403).