Toro 74954 - Throttle Control Assembly Replacement (Kohler EFI Engine); Throttle Control Assembly Removal

CHASSIS
3-14 Toro Z Master G3 3000/5000/6000 Series Service Manual
3
Throttle Control Assembly
Replacement (Kohler EFI Engine)
Throttle Control Assembly Removal
1. Disconnect the negative battery cable from the
battery terminal.
2. Remove the knob from the throttle control assembly
(Fig. 051).
Fig. 050 DSCN-4238a
Fig. 051 DSCN-4247a
3. Remove the 4 screws securing the control panel to
the RH Fender Console assembly (Fig. 052).
Fig. 052 DSCN-4249a
10. Install the right and left motion control covers with 2
screws each (Fig. 050).
11. Turn the valve to the “On” position.