Toro 74954 - Page 36

CHASSIS
3-15Toro Z Master G3 3000/5000/6000 Series Service Manual
3
4. Remove the locknuts and carriage bolts securing the
throttle control to the control panel (Fig. 053).
6. Remove the Z-bend end of the cable from the
throttle arm assembly (Fig. 055).
Fig. 053 DSCN-4250a
5. Loosen the cable clamp and remove the throttle
cable from underneath it (Fig. 054).
Fig. 054 DSCN-4253a
Fig. 055 DSCN-4258a
7. Slide the throttle cable through the hose clamp next
to the engine (Fig. 056).
Fig. 056 DSCN-4259a