MOWER DECKS
6-14 Toro Z Master G3 3000/5000/6000 Series Service Manual
6
7. Install the inner spacer to the spindle assembly (Fig.
423).
9. Install the seal. Press it ush with the top of the
housing (Fig. 425).
Note: The open lip of the faces inward.
Fig. 423 DSCN-2700a
8. Pack the bearing with No. 2 grease and install the
bearing (Fig. 424).
Fig. 424 DSCN-2694a
Fig. 425 DSCN-2696a
10. Install the bearing shield and the seal spacer onto
the spindle shaft (Fig. 426).
Fig. 426 DSCN-2702a
To Next Page
Loading...
