Toro 74954 - Page 29

CHASSIS
3-8 Toro Z Master G3 3000/5000/6000 Series Service Manual
3
6. Install the 2 spacer nuts and tighten (Fig. 029).
Fig. 027 PICT-0392a
5. Install the caster axle (Fig. 028).
Fig. 028 PICT-0393a
Fig. 029 PICT-0382a
7. Install the two guard seals, screw, nut and tighten
(Fig. 030).
Fig. 030 PICT-0394a
4. Install the grease seals into each side of the wheel
hub (Fig. 027).