CHASSIS
3-19Toro Z Master G3 3000/5000/6000 Series Service Manual
3
3. Remove two screws and spacers retaining the park
brake handle assembly to the frame (Fig. 068).
Fig. 068 DSCN-2619a
4. Remove the two cotter pins and clevis pins retaining
the right and left park brake cables to the handle
assembly (Fig. 069).
Fig. 069 DSCN-2623a
Fig. 070 DSCN-2626a
5. Remove two e-rings retaining the park brake cables
to the park-brake pivot assembly and slide the
cables out of the slots. Remove the park-brake
handle assembly from the unit (Fig. 070).
To Next Page
Loading...
