Toro 74954 - Page 49

CHASSIS
3-28 Toro Z Master G3 3000/5000/6000 Series Service Manual
3
6. Release the brake cable retainer holding the brake
cable to the cradle (Fig. 102).
Fig. 102 PICT-9085a
7. Guide the brake cable through the two holes in the
cradle (Fig. 103).
Fig. 103 cables routing #4
9. Remove the cotter pin located on the clevis pin
holding the brake cable clevis to the park brake lever
(Fig. 105).
8. Pull the brake cable through the hole in the side of
the frame (Fig. 104).
Fig. 104 PICT-9087a
Fig. 105 PICT-9090a
A. Right side brake C. Left side brake
assembly assembly
B. Cradle D. Retainer (5)
E. Hole (2)
A
B
E
E
C
D
D