Toro 74954 - Page 76

CHASSIS
3-55Toro Z Master G3 3000/5000/6000 Series Service Manual
3
3. Remove the two bolts and nuts retaining the LH
steering handle assembly to the LH lever-control
motion (Fig. 192).
Fig. 192 DSCN-4459a
4. Remove the lock nut from the damper motion control
from the LH motion control assembly (Fig. 193).
Fig. 193 DSCN-4462a
Fig. 194 DSCN-4464a
6. Remove the wire harness from the wire anchor on
the LH motion control assembly (Fig. 195).
Fig. 195 DSCN-4466a
5. Remove the plug connector to the neutral switch
(Fig. 194).