Toro Diesel Z Master - Page 101

HYDRAULIC SYSTEM
4-14 Z580/Z593/Z595 Diesel Service Manual
4
27. Apply thread locking compound to the 2 pump pulley
set screws (Fig. 288).
29. Slide the pump pulley onto the pump shaft (Fig.
290).
Fig 288 PICT-3307a
Fig 290 PICT-3345a
Belt Alignment Tool (Toro p/n: 110-0876) (Fig. 291):28. Loosely install the 2 set screws into the pump pulley
(Fig. 289).
Fig 291 alignment tool
Fig 289 PICT-3342a