ENGINE
5-31Z580/Z593/Z595 Diesel Service Manual
5
27. Slide the harness terminal onto the alternator termi-
nal and install a nut. Slide the rubber boot up over
the connection (Fig. 521).
Fig 521 PICT-3587
28. Plug the harness connector into the alternator (Fig.
522).
Fig 522 PICT-3585
29. Position the harness terminal to the oil switch and
install a screw and lock washer to secure (Fig. 523).
Fig 523 PICT-3581
30. Install a cable tie securing the harness to the sole-
noid wires (Fig. 524).
Fig 524 PICT-3576a
To Next Page
Loading...
