ENGINE
5-59Z580/Z593/Z595 Diesel Service Manual
5
2. Position the belt cover and install the upper bolt to
secure. Tighten the bottom bolt (Fig. 625).
5. Install 2 bolts securing the fan and retainer plate to
the engine (Fig. 627).
Fig 625 PICT-3797
Fig 627 PICT-3794
6. Position the oil cooler assembly to the rear radiator
support. Install 4 bolts, washers and nuts to secure
oil cooler to the rear radiator support (Fig. 628).
3. Check the alternator belt tension. Refer to “Checking
Alternator Belt Tension” on page 5-61.
4. Position the fan and retainer plate (Fig. 626).
Fig 628 PICT-3792a
Fig 626 PICT-3795a
To Next Page
Loading...
