MOWER DECKS
7-4 Z580/Z593/Z595 Diesel Service Manual
7
6. Using a spring removal tool (Toro p/n: 92-5771), re-
move the mower deck idler spring (Fig. 696).
8. Place the mower deck in the transport position.
Position wood blocks under each corner of the
mower deck. Lower the mower deck onto the blocks
to remove tension from the deck lift chains (Fig.
698).
Fig 696 PICT-4013
Fig 698 PICT-4019
9. Push the deck lift handle to the lowest height-of-cut
position to overcome the tension of the lift assist
springs. Insert the hitch pin above the deck lift
handle to lock the handle in the down position (Fig.
699).
7. Remove the mower deck belt from the gearbox deck
drive pulley (Fig. 697).
Fig 699 PICT-4021
Fig 697 PICT-4016
To Next Page
Loading...
