Toro Diesel Z Master - Page 97

HYDRAULIC SYSTEM
4-10 Z580/Z593/Z595 Diesel Service Manual
4
9. Tighten the 2 bolts securing the pump mounting
bracket to the bracket on the frame. Tighten the 2
bolts securing the mounting bracket to the pump
(Fig. 272).
11. Install the left wheel motor hoses. Note the location
of each of the hoses by the markings on the hoses
and wheel motor fi ttings (Fig. 274).
A. Right wheel motor, rear hose fi tting
B. Right wheel motor, front hose fi tting
C. Left wheel motor, rear hose fi tting
D. Left wheel motor, front hose fi tting
Fig 272 PICT-3259
Fig 274 PICT-3324
12. Tighten the left hand wheel motor hose fi ttings at the
pump and at the wheel motor.
13. Install the right wheel motor hoses. Note the location
of each of the hoses by the markings on the hoses
and the wheel motor fi ttings (Fig. 275).
10. Loosely install the 4 wheel motor hoses to the
bottom of the pump. Note the location of each hose
by the markings on the hose fi ttings and the pump
(Fig. 273).
Fig 275 PICT-3327
Fig 273 PICT-3322
A
A
D
D
B
B
C
C