Toro Diesel Z Master - Page 98

HYDRAULIC SYSTEM
4-11Z580/Z593/Z595 Diesel Service Manual
4
14. Tighten the right hand wheel motor hose fi ttings at
the pump and at the wheel motor.
15. With the hose clamp on the oil cooler hose, slide the
hose onto the pump fi tting (Fig. 276).
17. Slide a hose clamp over the hydraulic suction hose
(Fig. 278).
Fig 276 PICT-3331a
Fig 278 PICT-3333a
18. Slide the hydraulic suction hose onto the pump fi tting
on top of the hydrostatic pump (Fig. 279).
16. Position the hose clamp over the hose and fi tting
barb (Fig. 277).
Fig 279 PICT-3203a
Fig 277 PICT-3211