14
Review
e Review function allows you to view programming for all active irrigation schedules and sensors. is is a view only screen, no
adjustment can be made in these screens.
Step 1 – Press the REVIEW button.
REVIEW
SCHEDULE A
SCHEDULE B
RAIN SENSOR
WEATHER SENSOR
Step 2 – Press the Up or Down arrows to select Schedule A or B, Rain Sensor or Weather Sensor. Press SELECT to access.
REVIEW
SCHEDULE A
S M T W T F S
–
–
TOTAL RUNTIME 02:10
STARTS 6:00AM
REVIEW
RAIN SENSOR
STATUS DRY
ASSIGNED TO:
SCHEDULE A
SCHEDULE B
REVIEW
WEATHER SENSOR
ADJUST -38%
RAIN STATUS DRY
SENSOR TEMP 70
O
F
SIGNAL STRENGTH --
BATTERY LEVEL GOOD
ASSIGNED TO: NONE
In this example, Schedule A is set to water every day , except Saturday and Sunday (indicated by –). e total runtime for this
schedule is 2 hours and 10 minutes. It is the total runtime accumulated by all the valves’ runtimes for a single schedule run.
e Total Runtime is the duration the schedule will run during a watering day taking into account the number of starts as well
as any watering adjustments.
Step 3 – Press the HOME button to return to the main screen.
Water Off
e EVOLUTION
®
AG controller will not run any watering schedules while the WATER OFF screen is displayed.
In the Water O screen, there are three options that can be selected. Use the Up or Down arrows to make a selection.
DAY SELECTION (Example: IN 05 DAYS) – is option will keep all watering schedules from operating for the number of days selected.
Watering will resume automatically after the delay ends. Press SELECT to activate this option.
NEXT START – is option will allow watering to resume at the next scheduled start time.
REMAINS OFF – is option will keep all watering schedules from operating. e watering will remain o until the user changes the
value to NEXT START. Press SELECT to activate this option.
Note: e red light will illuminate to indicate that watering has been turned o.
Step 1 – Press the WATER OFF button.
All currently active automatic schedule(s) and manually activated schedules and valves will turn o. e EVOLUTION
®
AG
controller will not run any schedules while the WATER OFF screen is displayed.
Step 2 – Use the Up or Down arrows to assign the number of days until watering resumes. Select a water o duration of 1–14
days, NEXT START or REMAINS OFF. Press SELECT to enter or HOME to cancel. Pressing SELECT will save
your selection and take you back to the HOME screen.
WATER OFF
RESUME WATERING
NEXT START
REMAINS OFF
IN 01 DAY
IN 02 DAYS
To Next Page
Loading...
Need help?
General
