28
Save to USB
Save to USB is used to save all the schedules that are programmed in the controller so it can be reloaded if accidentally erased. e Save to
USB function is also helpful when loading multiple controllers with the same schedule programs.
Note: Although many USB ash drives may function well with the EVOLUTION
®
AG controller, the following USB specications
are recommended:
• USB Version 2.0 Compliant
• 1–8 GB Memory Size (Smaller memory size will perform faster.)
• FAT32 File System with 1 Logical Partition
Step 1 – Plug your USB Flash drive into the EVOLUTION
®
AG controller’s USB port located at the back of the control panel.
See Figure 2 on page 2.
Step 2 – Press the HELP/SETUP button.
Step 3 – Use the Up
or Down arrows to navigate to SAVE TO USB. Press SELECT .
HELP/SETUP
ALERTS
CONTACT TORO
SET TIME/DATE
LOAD FROM USB
SAVE TO USB
Step 4 – Use the Up or Down arrow to select YES from the conrmation window.
SAVE TO USB
ARE YOU SURE? YES
e EVOLUTION
®
AG controller will automatically save the schedules in the USB drive under the name format
“EVOLUTIONMMDDHHMM.evo” (MM = Month, DD = Day, HH = Hour and MM = Minute).
Preferences
Accessing the Preferences Menu
Step 1 – Press the HELP/SETUP button.
Step 2 – Use the Up or Down arrows to navigate to PREFERENCES. Press SELECT .
PREFERENCES
LANGUAGE ENGLISH
CONTRAST 00
CLOCK 12 HOUR
DATE FORMAT MM/DD/YY
BEGIN WEEK SUNDAY
PREFERENCES
TEMPERATURE
O
F
SOUND ON
LENGTH UNIT INCHES
VOLUME UNIT GPM
BACK LIGHT ON
Set Language
You can set the user interface to display in English (default), Spanish, French, German, Italian or Portuguese.
Step 1 – While in the PREFERENCES menu, use the Up or Down arrows to navigate to LANGUAGE. Press SELECT .
Step 2 – Use the Up or Down arrows to navigate to your preferred language. Press SELECT .
Set Display Contrast
Step 1 – While in the PREFERENCES menu, use the Up or Down arrows to navigate to CONTRAST. Press SELECT .
Step 2 – Use the Up or Down arrows to your preferred display contrast. Positive (+) setting will increase the contrast and
negative (–) setting will decrease the contrast. Once you nd the desired contrast, press SELECT .
Set Clock Format (12-Hour/24-Hour)
Step 1 – While in the PREFERENCES menu, use the Up or Down arrows to navigate to CLOCK. Press SELECT .
Step 2 – Use the Up
or Down arrows to select 12-Hour (default) or 24-Hour format. Press SELECT .
To Next Page
Loading...
Need help?
General
