Check Battery Fluid Level
Check Battery Cable Connections
Lubricate All Grease Fittings
Lubricate Brake Cables
Check Cutting Unit Gear Box Oil Level
Clean Under Cutting Unit Belt Covers
Check Cutting Unit Drive Belt Adjustment
Change Engine Oil
Inspect Air Filter, Dust Cup, and Baffle
} Change Engine Oil Filter
Check Electric Clutch Gap Adjustment
{ Check PTO Belt Tension
{ Check Fan and Alternator Belt Tension
Inspect Cooling System Hoses
Service Air Filter
Check Rear Wheel Toe-In and Steering Linkage
{ Change Transmission Filter
{ Torque Wheel Lug Nuts
Drain and Clean Fuel Tank
Change Cutting Unit Gear Box Oil
Change Electric Fuel Pump Filter
Change Fuel/Water Separator Filter
Pack Rear Wheel Bearings
Coat Transmission Bypass Pins with Grease
} Torque Head, Adjust Valves and Check Engine RPM
{ Initial break in at 10 hours
} Initial break in at 50 hours
Replace Moving Hoses
Replace Safety Switches
Coolant System - Flush/Replace Fluid
Replace Hydraulic Oil
Every
50hrs
Every
100hrs
Every
200hrs
Every
400hrs
Items listed are recommended every 1000
hours or 2 years, whichever occurs first.
To Next Page
Loading...
