The traction unit has two identification numbers: a
model number and a serial number that are stamped
into a plate. The identification plate is located near the
left brake pedal on the frame (Fig. 44). In any
correspondence concerning the traction unit, supply
the model and serial numbers to ensure correct
information and replacement parts are obtained.
To order replacement parts from an Authorized TORO
Distributor supply the following information:
Model and serial numbers of the traction unit.
Part number, description and quantity of parts
desired.
Do not order by reference number if a parts
catalog is being used; use the part number.
!
To Next Page
Loading...
