Toro Lawn-boy - Page 28

21
CARBURETOR
2. Hold the
g
overnor collar on the carburetor and lift
the air vane/throttle shaft out of the carburetor. For
DuraForce en
g
ines only - Lift the collar and sprin
g
up, detachin
g
the sprin
g
from the speed control
lever. (See Fi
g
ure 21.)
Fi
g
ure 21
0893-005
3. Turn the carburetor over. Remove the four bowl
retainin
g
screws, the bowl
g
asket, and the bowl.
(See Fi
g
ure 22.) Discard the bowl
g
asket.
Fi
g
ure 22
0893-002
4. The pilot jet is located under the decal on the side
of the carburetor. Remove the decal and the pilot
jet. Note: The threads have Loctite on them. (See
Fi
g
ure 23.)
Fi
g
ure 23
0893-30
5. Remove the fuel filter from the fuel nozzle (see
Fi
g
ure 24).
Fi
g
ure 24
0893-22