Toro LT-F3000 - Hydraulic Fluid Change and Strainer Cleaning

8.Shutofftheengine,removethekey,andcheck
forleaks.
9.Closeandlatchthehood.
ChangingtheHydraulic
Fluid
ServiceInterval:Every1,000hours—Ifyou
areusingtherecommended
hydraulicuid,changethe
hydraulicuid.
Every500hours—Ifyouarenotusingthe
recommendedhydraulicuidorhaveever
lledthereservoirwithanalternativeuid,
changethehydraulicuid.
Iftheuidbecomescontaminated,contactyour
authorizedTorodistributortoushthesystem.
Contaminateduidlooksmilkyorblackwhen
comparedtocleanuid.
DrainingtheHydraulicFluid
1.Parkthemachineonalevelsurface,lowerthe
cuttingunits,shutofftheengine,engagethe
parkingbrake,andremovethekey.
2.Removethestoragecompartment;referto
RemovingtheStorageCompartment(page40).
3.Alignadrainpanunderthehydraulictank,
removethetankdrainplug,andfullydrainthe
hydraulicuid(Figure72).
g292488
Figure72
1.Hydraulictank3.Drainplug
2.Seal
4.Installthedrainplugwithanewseal.
CleaningtheStrainers
1.Removetheoiltanksuctionangetogain
accesstothesuctionstrainer(Figure73).
g014452
Figure73
1.Oil-tankllercap
3.Fillerstrainer
2.Suctionstrainer
2.Unscrewandremovethestrainerandcleanwith
parafnorpetrolbeforeinstalling(Figure73).
HydraulicFluidCapacity
32L(8.5USgallons);refertoHydraulicFluid
Specications(page54)
FillingtheHydraulicTankwith
Fluid
1.Fillthehydraulictankwiththespeciedhydraulic
uid;refertoHydraulicFluidSpecications
(page54)andCheckingtheHydraulicFluid
Level(page55).
Important:Useonlyhydraulicuids
specied;otherhydraulicuidscould
damagethesystem.
2.Runthemachineandoperateallhydraulic
systemsuntilthehydraulicuidiswarm.
3.Checktheuidlevelandtopupasnecessaryto
theuppermarkonthesight-levelgauge.
4.Installthestoragecompartment;referto
InstallingtheStorageCompartment(page40).
56