Toro Outcross 9060 Series - Page 41

10.Removetheballastbox;refertoRemovinga
Rear3-PointAttachment(page29).
InstallingtheLoader
DANGER
Adetachedloadercanfallandcauseserious
injuryordeath.
•Removetheloaderonahard,levelsurface.
•Keepchildrenandbystandersawayfrom
thedetachedloader.
1.Installtheballastbox;refertoInstallingthe
BallastBox(page31).
2.Starttheengineandslowlydrivethemachine
uptotheloaderarms(Figure52).
Note:Ensurethatthemachineiscentered
betweenbothsidesoftheloaderarms.
g272119
Figure52
3.Stopthemachine,shutofftheengine,and
engagetheparkingbrake.
4.Movetheloaderjoysticktotheleft,right,and
backtotheNEUTRALpositiontorelievepressure
atthehydrauliccouplers(Figure53).
g252836
Figure53
5.Performthefollowingstepstoconnectthe
hydrauliccouplers(Figure54):
A.Removethedustcapsfromeachcoupler
andbulkhead.
B.Locatethefemaleandmalecouplersthat
haveacabletiesecuredtoeachcoupler
andnotethatthesecouplersmustbe
installedtothetopbulkheadsthatalsohave
acabletiesecuredtothem.
C.Connectthemalehosecouplersbypulling
backonthebulkheadandpushinginthe
malehosecouplerstothebulkheads.
D.Connectthefemalehosecouplersby
pullingbackonthefemale-hose-coupler
sleevesandpushinginthehosecouplers
tothebulkheads
Important:Removeanydirtordebrisfrom
eachcouplerandbulkhead.
41