Toro RT600 - Maintenance; Premaintenance Procedures; Lubrication; Greasing the Machine

Premaintenance
Procedures
GeneralSafety
WARNING
Improperlyservicingorrepairingthemachinecan
causeinjuryordeath.
Ifyoudonotunderstandtheserviceproceduresfor
thismachine,contactanAuthorizedToroService
Dealerortheservicemanualforthismachine.
WARNING
Raisedequipmentonthemachinewithoutan
operatorcancauseinjuryordeath.
Beforeyouleavetheoperatingarea,alwayssupport
orlowertheequipmenttothegroundandstopthe
engine.
WARNING
Replaceallcoversandguardsafteryouserviceor
cleanthemachine.Neveroperatethemachine
withoutthecoversorguardsinplace.
1.Parkthemachineonalevelsurface.
2.Lowerallattachmentsandstoptheengine,andremove
thekey.
3.Allowtheenginetocool2or3minutes.
4.Removetheright-sidepanel;refertoRemovingthe
SidePanels(page35).
5.Rotatethebattery-disconnectswitchtotheOff
position.
Lubrication
GreasingtheMachine
GreaseType:Lithium-basedgrease.
GreasingtheFrontandRearAxles
ServiceInterval:Every200hours
1.Cleanthegreasettingswitharag.
2.Connectthegreaseguntothegreasettingsforthe
upperandlowerpivots;apply2or3pumpsofgrease
toeachtting(Figure30andFigure31).
Note:Thereare2greasettingsattheaxlepivotfor
eachtire.
Figure30
Frontaxle
1.Greasetting(upperpivot)2.Greasetting(lowerpivot)
33