Toro RT600 - Cleaning the Axle Breathers

CleaningtheAxleBreathers
ServiceInterval:Every300hours
1.Cleantheareaaroundthebreatherswithacleaning
solvent(Figure73andFigure74).
Figure73
1.Frontaxle
3.Breathertting
2.Breatherport
Figure74
1.Rearaxle
3.Breathertting
2.Breatherport
2.Removethebreatherfromthefrontaxle(Figure73).
3.Removethebreatherfromtherearaxle(Figure74).
4.Cleanthebreatherswithacleaningsolvent.
5.Usecompressedairtodrythebreathers.
Important:Wearfaceprotectionwhenusing
compressedair.
6.Installthebreatherinthefrontaxle(Figure73).
7.Installthebreatherintherearaxle(Figure74).
53