Toro TX 1300 - Replacing the Tracks (Continued)

7.Loosenthejamnutandturnthetensioning
screwtoreleasethetension.
g363401
Figure89
1.Tensioningscrew2.Jamnut
8.Removethesegmentofthedrivesprocketnot
engagedwiththetrack.
Important:Ifyoudonotremovethe
sprocketsegment,itmaybedifcultto
installanewtrackwithoutdamagingit.
g361327
Figure90
1.Bolt(5)2.Sprockethalf
9.Startthemachineanddisengagetheparking
brake.
10.Movethetractioncontrolforwarduntiltheother
halfofthedrivesprocketisnotengagedwith
thetrack
g361325
Figure91
11.Shutofftheengineandremovethekey.
12.Removethetrackfromthetrackframe,drive
hub,thenfrontwheel.
InstallingtheTracks
1.Wrapthenewtrackaroundthefrontwheel.
g361328
Figure92
1.Track
3.Roadwheel(4)
2.Frontwheel4.Rearwheel
2.Pushthetrackunderandbetweentheroad
wheelsandwrapitaroundtherearwheel.
3.Starttheengineanddisengagetheparking
brake.
4.Movethetractioncontrolforwarduntilthedrive
sprockethalfengageswiththetrack.
g361324
Figure93
5.Shutofftheengineandremovethekey.
58