Toro V - Carburetor Specifications

Bolt, Blade
Nut, Flywheel
Screw, Air vane
81.6 N-m)
Screw, Carburetor mounting
Screw, CD ignition pack
90 110 in lbs (10-12 N-m)
Screw, Cylinder to crankcase 105 I 115 in lbs (.I2 I3 N-m
Screws, Engine mounting
350-400 in Ibs (39 45 N-m)
Screw, Ground strap stop
15 25 in Ibs (1.7 2.8
Screw, Muffler cover
150 190 in Ibs (I7 22 Nom)-.
Screw, Muffler plate
140 200 in Ibs (16 22 N-m)
Screw, Reed*
10 13 in Ibs(1.1-1.5 N-m)
N-m)
~-
65 75 in Ibs (7,3 -8.4 N-m)
Screw, Shroud
20 25 in Ibs (2.3 2.8 N-m)
*Use thread-locking compound
See page
2.2
Carburetor Specifications
1-4
Reference Section