Toro V - Spark Plug Torque; Exhaust System

To Next Page

To Previous Page

Spark Plug Gap

Set the spark plug gap to

.035"

(.85mm).

Spark Plug Torque

Install the spark plug finger tight, then torque to 180

in Ibs (15

ft.

Ibs.) (20 Nm), or 1/4 turn after plug and

gasket are seated.

0490

751.1

Exhaust

System

Cleaning

WARNING: Disconnect the spark plug wire to

prevent accidentally starting the engine.

TOOLS

REQUIRED:

1/2" drive

5/8"

socket

3/8"

(9mm) wooden dowel

while removing the bolt. Using the 1/2" drive

and

5/8"

socket, remove the blade bolt that

secures the accelerator, blade and blade

retainer. Remove the accelerator, blade

and blade retainer.

Wearing heavy duty gloves hold the blade

Reference Section

4-5

Toro V - Spark Plug Torque; Exhaust System - Cleaning