SERVICE
Tank
Removal
Tools
Required
Clamping Pliers
Minimum
1.5
Qt (1.41ltr)Container
#T25
Tow
1.
Disassemble the starter rope
“T”
handle
sufficiently to untie (or cut) the starter rope
knot and release the rope from the handle
(
the plastic rope-stop prevents the rope
from rewinding completely into the starter).
NOTE: To remove the fuel tank, you may either
crimp the fuel hose and use the clamping pliers
to remove the fuel hose from the carburetor.
Release the clamping pliers and drain the fuel
into a container designed
to
receive gasoline.
OR
You may reach under the edge of the fuel tank
to pull the hose off the tank outlet, but you must
be ready to catch the fuel that will drain out of
the tank.
If
you use this method, you must have
a container large enough to hold the amount of
fuel in the tank.
6-4
Service
Section
To Next Page
Loading...
