Toro Workman MDX-D - Adjusting the Headlights; Drive System Maintenance; Maintaining the Tires

AdjustingtheHeadlights
Usethefollowingproceduretoadjusttheheadlight
beampositionwheneveraheadlightassemblyis
replacedorremoved.
1.TurnthekeyswitchtotheONposition,andturn
ontheheadlights.
2.Atthebackoftheheadlightassembly,rotate
adjustmentscrews(Figure43)topivotthe
headlightassemblyandalignthepositionofthe
castbeam.
DriveSystem
Maintenance
MaintainingtheTires
ServiceInterval:Every100hours—Checkthe
conditionofthetiresandrims.
Every100hours—Torquethewheel-lugnuts.
1.Inspectthetiresanrimsforsignsofwearand
damage.
Note:Operatingaccidents,suchashitting
curbs,candamageatireorrimandalsodisrupt
wheelalignment,soinspecttireconditionafter
anaccident.
2.Torquethewheel-lugnutsto108to122N∙m(80
to90ft-lb).
41