5-17Z Master Z400 Service Manual
5
ENGINE
23. Remove the engine pulley (Fig. 269).
Fig 269 PICT-0018c
24. Remove the 4 engine mounting bolts (Fig. 270).
Note: The left rear engine mounting bolt has 3
ground wires attached.
Fig 270 PICT-0287
Fig 271 PICT-0290
25. Connect chains to the two lift points on the engine
and raise the engine from the frame (Fig. 271).
Fig 268 PICT-0017c
22. Remove the drive belt from the engine pulley (Fig.
268).
To Next Page
Loading...