6-5Z Master Z400 Service Manual
6
ELECTRICAL
Ignition Switch
6. Replace the switch if your test results do not
correspond with those given in (Fig. 385).
7. Mount the PTO switch back into the control panel
and reinstall the wiring harness (Fig. 386).
Violet
Orange
GrayGray
Gray
Orange
Orange
Fig 386 PTO clutch switch
The ignition switch makes the proper connections for the
starter, accessories, and safety circuits.
Fig 387 PICT-0191
The ignition switch is located on the control panel, to the
left side of the operator (Fig. 387).
Purpose
Location
To Next Page
Loading...