Toro Z Master Z400 Series - Deck Lift Lever Installation

3-28 Z Master Z400 Service Manual
3
CHASSIS
Deck Lift Lever Installation
15. Inspect the deck lift lever assembly components for
wear, especially the bushings (Fig. 127).
Fig 127 PICT-0061 rev
1. Install the bracket that supports the lower RH corner
of the panel assembly (Fig. 128).
Fig 128 PICT-0055
Fig 126 PICT-0060
14. Carefully slide the lift lever grip assembly out of its
carrier frame pivot (Fig. 126).
Fig 125 PICT-0059 rev
13. Remove the retainer clip from the lift lever grip
assembly (Fig. 125).
A
B C
D
E
F
A. Lift Handle Assembly D. Plates
B. Nuts E. Bushings
C. Bolts F. Retainer Clip