3-27Z Master Z400 Service Manual
3
Fig 122 PICT-0034
9. Lift the oor pan assembly to its fully opened
position.
10. Remove the panel assembly by removing the four
fasteners retaining the panel to the frame (Fig. 122).
Fig 121 PICT-0054 rev
8. Loosen the top hex head ange nut at the deck lift
plate mounting location. Pivot the INNER deck lift
plate up and back toward the RH motion control
lever (Fig. 121).
CHASSIS
11. Remove the bracket that supports the lower RH
corner of the panel assembly (Fig. 123).
Fig 123 PICT-0055
12. Remove the hex bolts, bushings, and nylock nuts
connecting the deck lift arm plates to the mower
deck rear cross-shaft lift assembly (Fig. 124).
Fig 124 PICT-0057
To Next Page
Loading...