3-29Z Master Z400 Service Manual
3
CHASSIS
Fig 130 PICT-0063
3. Install lift lever assembly into front frame pivot
location (Fig. 130).
Fig 129 PICT-0062 rev
2. For ease of installation, make sure deck lift arm
plates, bushings and hardware are installed on the
deck lift lever assembly prior to installation (Fig.
129).
4. Install bolt, nut and bushing through the plates into
the rear deck lift cross-shaft (Fig. 131).
Fig 131 PICT-0064
5. Install the retainer clip on the deck lift lever assembly
shaft (Fig. 132).
Fig 132 PICT-0065
To Next Page
Loading...