5-27Z Master Z400 Service Manual
5
ENGINE
16. Remove the center bolt and two spring washers
holding the electric PTO clutch to the engine
crankshaft (Fig. 307).
Fig 307 PICT-0014c
17. Remove the electric PTO clutch (Fig. 308).
Fig 308 PICT-0015c
Fig 310 PICT-0017c
19. Remove the drive belt from the engine pulley (Fig.
310).
Fig 309 PICT-0016c
18. With a spring puller, remove the extension spring
from the idler arm assembly and remove the cog belt
from the pump drive and idler pulleys (Fig. 309).
To Next Page
Loading...