5-38 Z Master Z400 Service Manual
5
ENGINE
18. Remove the center bolt and two spring washers
holding the electric PTO clutch to the engine
crankshaft (Fig. 350).
Fig 350 PICT-0014c
Fig 352 PICT-0016c
20. With a spring puller, remove the extension spring
from the idler arm assembly and remove the cog belt
from the pump drive and idler pulleys (Fig. 352).
Fig 351 PICT-0015c
19. Remove the electric PTO clutch (Fig. 351). 21. Remove the drive belt from the engine pulley (Fig.
353).
Fig 353 PICT-0017c
To Next Page
Loading...