5-41Z Master Z400 Service Manual
5
ENGINE
7. Apply a thread-locking compound to the clutch
retainer bolt (Fig. 362).
Fig 362 PICT-0026c
Fig 364 PICT-0027c
9. Torque the center bolt to 55 ft-lbs. (74.6 Nm) (Fig.
364).
Fig 363 PICT-0014
8. Install the clutch retainer bolt and two spring
washers that hold the electric PTO clutch to the
engine crankshaft (Fig. 363).
10. Plug the clutch pigtail harness into the main harness
(Fig. 365).
Fig 365 PICT-0100a
To Next Page
Loading...