Toro Z Master Z400 Series

To Next Page

To Previous Page

7-12 Z Master Z400 Service Manual

MOWER DECKS/PTO

Mower Deck Installation

8. Remove the strut pin (Fig. 446).

Note: The gauge wheels may need to be loosened

or removed to remove the strut pin.

Fig 446 PICT-0380

9. Raise the lift lever to the transport position.

10. Remove the 4 x 4 wood blocks from under the deck.

11. Turn the right front wheel so the castor fork is angled

forward. This will allow more clearance to slide the

mower deck from under the frame (Fig. 447).

Fig 447 PICT-0381

Fig 449 PICT-0393

Z 100 Series (44” Deck)

1. Turn the right front wheel so the castor fork is angled

forward. This will allow more clearance to slide the

mower deck under the frame (Fig. 449).

Fig 448 PICT-0382

12. Slide the mower deck out the right side of the unit

(Fig. 448).

Toro Z Master Z400 Series - Page 169