Toro Z Master Z400 Series - Page 176

7-19Z Master Z400 Service Manual
7
MOWER DECKS/PTO
Fig 473 PICT-0159 rev
4. Remove the spindle housing from the spindle shaft
assembly (Fig. 473).
Fig 472 PICT-0158
3. Remove the bearing shield and thrust washer (Fig.
472).
5. Remove the ball bearing from the top of the spindle
housing (Fig. 474).
Fig 474 PICT-0160 rev
6. Remove the bearing spacer (Fig. 475).
Fig 475 PICT-0161