3-7Z Master Z400 Service Manual
3
CHASSIS
2. Pack the upper and lower tapered roller bearings
prior to installation (Fig. 052).
Fig 052 PICT-0214
3. Install the lower tapered bearing and lower seal with
the open end of the seal facing up (Fig. 053).
Fig 053 PICT-0215
Fig 055 PICT-0207
5. Install the caster fork into the frame (Fig. 055).
Fig 054 PICT-0216
4. Install the upper tapered bearing (Fig. 054).
To Next Page
Loading...