Toro Z Master Z400 Series - Page 73

4-8 Z Master Z400 Service Manual
4
HYDRAULIC SYSTEM
Fig 172 PICT-0100a
3. Unplug the clutch pigtail harness from the main
harness (Fig. 172).
Fig 171 PICT-0099a
2. Remove the plastic tie holding the clutch harness to
frame (Fig. 171).
4. Loosen the clutch stop rod and pivot away from the
clutch (Fig. 173).
Fig 173 PICT-0104a
5. Remove the belt from the clutch drive pulley (Fig.
174).
Fig 174 PICT-0106a rev