Toshiba 32W2300A - Advanced Picture Settings; Colour Temperature and Gamma; Backlight and Brightness Controls; 3 D Colour and Base Colour Adjustment

25
Using the TV’s features (General)
Colour Temperature
Colour Temperature increases the ‘warmth’ or
“coolness” of a picture by increasing the red or blue tint.
1. In the Picture Settings
select Colour Temperature
2. Colour Temperature and
Medium, Warm or Cool to
suit your preference.
Colour Temperature
Colour Temperature
Red Level
Green Level
Blue Level
Medium
0
0
0
3. Red Level, Blue Level
or Green Level
settings as required.
Static Gamma
The Static Gamma feature allows you to adjust the
levels of black in the picture.
1. In the Picture Settings
select Static Gamma.
2. Static
Gamma (-5~+5).
Reset
This feature resets all picture settings to the factory
settings.
In the Picture Settings
Reset and press
to reset settings.
Note: If any picture settings have not been changed,
Reset is not available.
Active Backlight Control
When the Active Backlight Control feature is activated,
High mode will control the backlighting levels depending
on various scenes such as picture motion, bright scene
or dark scene. Low mode will control the backlighting
level on dark scene.
1. In the Picture Settings
select Active Backlight Control.
2. Off, Low or High.
Auto Brightness Sensor
When the Auto Brightness Sensor is activated, it will
automatically optimise the backlighting levels to suit
ambient light conditions.
1. In the Picture Settings
select Auto Brightness Sensor.
2. On or Off.
3D Colour Management
When 3D Colour Management is set to On, it allows the
Base Colour Adjustment feature to become available.
You can adjust the picture colour quality by selecting
from 6 base colour adjustments : Red, Green, Blue,
Yellow, Magenta or Cyan.
1. In the PICTURE3D
Colour Management.
2. On or Off.
Note: When a DVD movie with subtitle is playing back,
this mode may not work correctly.
Base Colour Adjustment
The Base Colour Adjustment feature allows the
adjustment of individual colours to suit personal
preference. This can be useful when using an external
source. It only can be adjusted when 3D Colour
Management is set to On.
1. In the PICTURE
Base Colour Adjustment and press
to enter the
submenu.
2. 
and press
.
RETURN
Back
Base Colour Adjustment
Red
Green
Blue
Yellow
Magenta
Cyan
Reset
0
0
0
0
0
0
Hue Saturation
0
0
0
0
0
0
Brightness
0
0
0
0
0
0
OK
Edit
OK
3. Hue, Saturation or
Brightness.
4. 
Note: In the PC Input mode, this function is not available.