Toshiba 51H94 - Connecting a VCR and Antenna or Cable TV (no Cable Box); Connecting a Camcorder

A ÷ L
Connecting a VCRand antenna or CabJeTV (no CabJebox)
You will need:
one coaxial cable
one set of standard A/V cables
* For butte/pietu/e peitoerlanc< if you/VCR has S video, use an
S vkleo cobb (plus rile audio cabbs:) instead of the stHnd_ffdvideo
cable HoweveL do not connect hurl7 types of video cables to
VIDEO 1 (or VIDEO 2j at the same time of the picture
peffofTnanee winbe unaeceptabb
* ffyou have a menu I/CR connect L/MONO on the TV to your
I/'CR_ audio outjnek using tile whM audio cable onl%
To view the antenna or Cable sig!l_al:
Turn OFF the VCR.
Sdect the ANT 1 video inpur source.*
To view the VCR:
T.rn ON the VCR. Select the VIDEO 1 video inpur source
on the TV.*
._[itrn ON the VCR. Sdect the ANT 1 video input source.*
Tune the TV to cham_d 3 or 4 (whiche_er cham_d isvacant
in your area).
To use the TV-Guide On Screen recording features:
1. Connect the G-UNK cable according to the instructions
on page 25.
2. Make sure the VCR is cormected to d_eA/V OUT jacks
on the TV (seeillustration).
3. SeEd_eVCR to d_e appropriate Iirle input (refbr to your
VCR owner's manual fbr det:ails),and then turn Ot_F d_e
VCR.
4. See Chapcer 5 fbr deEailson seEdng up the TV Guide
On Screen system.
5. See Chapcer 7 fi)r deEailson using the TV Guide
On Screen system.
Stereo VCFI
rum AN_ VIDEO AUDIO
!OUTtoTS
FromCable1_/
or antenna
Note: 2_e VIDEO/AUDiO OUT_/?_cksoutput the s/:qna/sfrom the
ANT 7 ANT2 I/IDEO 1 VIDEO 2, or VIDEO 3jacks when the
approprTDte/bput mode is se/ectecZ
The unauthorized recording, use, distribution, or revision of teJevisiun
prug:'ams, videotapes, DVDs, and uther materials is p:'ebibRed under the
Copyrigbt Laws of tbe United States and uther countries, and may subject
yea to civil and criminaJ liabiJity.
÷
Connecting a camcorder
You will need:
one set:of standard A/V cables
* For bertel pletule peifoirrlanc< ifj/oul car;?corUel has S video, use an
S video cable (plus UTeauciio cables;) instead of tile sesnd_ffdvicieo c'_sble
DO I)Ot C'()sTfTectboW?81),5'video cable arid a sr_oldiffd video cable 17)VIDEO
3 at the same time or tbe pk'tule peitoersance win be tJllaccef2bdT/e
To view the camcorder video:
Sdect: t:heVIDEO 3 video inpu_ source.*
* Io select the video input source, press IN PUT on the remote control [see page 67).
Io program the PV remote control to operate other devices, see Chapter 3.
Copyright @ 2004 TOSHIBA CORPORATION, All rights reserved,
Hg4(E)012-25(2B-Cnct) 13
8/3/04, 3:41 PM
13
[