A ÷ L
Connecting an HDMI" or a DVi device to the HDMI input
The HDMI Ininput on your IV receives digital audio
and uncompressed digital video from an HDMI device
or uncornpressed digital video fforn a DVI[2]device,
This input is designed to accep[ HDCP [31program maceriaI in
digital form fl'om EL&/CEA-861/861B-compIhnt [<consumer
deccronic devices (such as a set-cop box or DVD phyer with
HDMI or DVI ouspuD,
The HDMI input is designed for best pertbrmance with 1080i
high-definition vide<)signals, btt[ wiIIalso accep[ and disphy
480i, 480p, and 720p signals.
[
III@'I'E:IItlEVIiR gONI!!EC'I: "I'ttlS "I'V
1"0 Ill t_IittI$@NAI. COMt_lll'rlilll (PC).
THISTVIS NOTINTENDEDFORUSEWITHAPC,
To conned an HDMI device, you will need:
" one HDM{ cabD (rype A connecror)
For pmper operation, if is FecommetTrlerJ that you use
as short an HDMI cable as possible You shoulU nol
enoount_r r//fficulty ffyou use an HDMI cable shorl_r
tftat7 Z(£4 fl _Smj
HDM/ cable trdnsfers both video and auUio, SepaFate
a/_a/og audio cables are not r_qu/red #ee illuslrat/on
be/ow2 Some CDVs (v/Ueo CDs] may no1 output digital
auUio signals In that c;as< you may heat somTd by
oonnecUtlg analog audio c.ab/es I-luwever; ff you connect
analog auUk_cables with this c.onnection, the HDMI
t_fTrTitTalon the TV win Rot rsoc/ve UTeHDMI Ut7Tit_laudio
signalandyou willheatanakdaudioonls
c,_ ">orangthe HDMI audio moUe" o page 50,
HDIVll device
TV
::2
© L_R® 7,r
[q HDM/ Iq_jh Definition Mult/medkl leterf_ce
[2] DV/ Digital ViUeo/nten';_ce
Is] NDCP H,/_'hbafTdw/dth D/_'/?;IIContesTtPfotect/orl
[_] E/A/CFA 86 W861B compliance covets the tf_lf7smlsslof7of
uocompf>ssed d/_'/ta/ v/Ueo with h/gh batldw/dth digital cof)tef)t
protection, wlTM_ /s beie[i stgmdardl2ed lotf_ception of hl_'h definition
video signals Because tiffs/s an evoMng tedTno/oss h'/s possible that
some devices may riot opel_te pfope[/y with the Th'
NOTE: _ ensure that the HDM/ ot DV/ device /s reset
pfopefljz it _sr_commended tbat you b/low these
pmcedu/es
• When tumillg on your electronic COf[Ipof7efffS, tt_H_ O#t
the Tli first, and tbeo tl_eHDMI o_ DVI device
• Whel_ turning offyour electtonio compoilen_s, turn off
the NDMt or Oil# dev#ce first and then tl_e TQ:
To connect a DVI device, you will need:
. one HDMI-to-DVI adap[er cable
(HDMI type A connector)
_b_ pmper opelat/on, the length of an HDMI-to DIll
ad_ptef oHb/e dToul(I riot exceed 98 tt C3mj Yhe
r_comn'le/_ded lerlg177/s 6 6 tt _2m]
" one pair of standard analog audio cables
An HDMI to DIll adapter cable ttansfef_ video oelJzSepmate
analog audio cabbs a_e squired (see/llustsat/on brow)
See "SettkW lDe HDM/ auo'/o mode" on page 5&
÷
HDMI.the HDMI logo,and High DefinitionMultimedia Interlace
aretrademarksor registeredtrademarksof HDMI Licensing,LLC,
Copyright @ 2004 TOSHIBA CORPORATION, All rights reserved,
H94(E)012-25(2B-Cnct)
19
÷
8/3/04, 3:42 PM
19
r
To Next Page
Loading...
